F065
Diamita na Bututun Waje:
- An ba da shawarar ta hanyar Ma'aunin Kasuwanci na Kayan Aikin HL Cryogenic. Hakanan ana iya samar da shi bisa ga buƙatun abokin ciniki.
- Matsi na Zane:
- An ba da shawarar ≤ sandar 16. Ko kuma zaɓi Nau'in Haɗin da aka Haɗa da Walda (sandar ≤40).
- Kayan Bututun Waje
Ba tare da wata buƙata ta musamman ba, za a zaɓi kayan bututun ciki da bututun waje iri ɗaya.
3.1.3 Nau'in Haɗin da aka Haɗa da Walda
odel
Haɗi
Nau'i
Diamita na Bututun Ciki
Matsi na Zane
Kayan Aiki
Bututun Ciki
Daidaitacce
Bayani
W010
00X
Nau'in Haɗin da aka Haɗa don Tiyo Mai Sauƙi Mai Rufewa Mai Tsayi
DN10, 3/8"
8~40 mashaya
Bakin Karfe Jerin 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Diamita na Bututun Waje: | |
| Matsi na Zane | Kayan Bututun Ciki. | A shine 304, | DN40, 1-1/2" | C shine 316, |
| D shine lita 316, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Matsi na Zane |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| An ba da shawarar ≤ DN25 ko 1". Ko kuma zaɓi Nau'in Haɗin Bayonet na Vacuum tare da Flanges da Bolts (daga DN10, 3/8" zuwa DN80, 3"), Nau'in Haɗin da aka Welded (daga DN10, 3/8" zuwa DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Daidaitacce | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Diamita na Bututun Waje: |
| An ba da shawarar ta hanyar Ma'aunin Kasuwanci na Kayan Aikin HL Cryogenic. Hakanan ana iya samar da shi bisa ga buƙatun abokin ciniki. | Kayan Bututun Waje | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Nau'i | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Daidaitacce | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Matsi na Zane. | / | DN25, 1" | DN25, 1" | / | |
| Kayan Bututun Ciki. | / | DN25, 1" | DN25, 1" | / | |
| C shine 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Diamita na Bututun Ciki:
| An ba da shawarar ≤ DN25 ko 1". Ko kuma zaɓi Nau'in Haɗin Bayonet na Vacuum tare da Flanges da Bolts (daga DN10, 3/8" zuwa DN80, 3"), Nau'in Haɗin da aka Welded (daga DN10, 3/8" zuwa DN150, 6") | Diamita na Bututun Waje: |
| An ba da shawarar ta hanyar Ma'aunin Kasuwanci na Kayan Aikin HL Cryogenic. Hakanan ana iya samar da shi bisa ga buƙatun abokin ciniki. | Matsi na Zane: |
| An ba da shawarar ≤ sandar 16. Ko kuma zaɓi Nau'in Haɗin da aka Haɗa da Walda (sandar ≤40) | Kayan Bututun WajeBa tare da wata buƙata ta musamman ba, za a zaɓi kayan bututun ciki da bututun waje iri ɗaya.3.2 Tsarin Bututun Injin Tsaftacewa Mai Tsafta3/S |
| 3.2.1 Nau'in Haɗin Bayonet na Vacuum tare da Maƙallan | odel |
| Haɗi | Nau'i |
| Diamita na Bututun Ciki | Matsi na Zane |
| Kayan Aiki | Bututun Ciki |
| Daidaitacce | Bayani |
HDB01008
Nau'in Haɗin Bayonet na Vacuum tare da Maƙallan don Tiyo Mai Sauƙi Mai Rufewa na Vacuum Mai Sauƙi
lDN10, 3/8"
lmashaya 8
| Bakin Karfe Jerin 300 C shine 316, | Kayan Bututun Ciki. | |
| A shine 304, | B shine 304L,C shine 316,D shine lita 316, | |
| E wani kuma. | HLH | DB01508 |
| DN15, 1/2" | Matsi na Zane: | Matsi na Zane: |
| DN20, 3/4" | Matsi na Zane: | Matsi na Zane: |
| DN25, 1" | Matsi na Zane: | Matsi na Zane: |
| Diamita na Bututun Waje: | Matsi na Zane: | Matsi na Zane: |
An ba da shawarar ≤ sandar 8. Ko kuma zaɓi Nau'in Haɗin Bayonet na Vacuum tare da Flanges da Bolts (≤ sandar 16), Nau'in Haɗin da aka Welded (≤ sandar 40)Kayan Bututun WajeBa tare da wata buƙata ta musamman ba, za a zaɓi kayan bututun ciki da bututun waje iri ɗaya.
Yanayin Wutar Lantarki:
HL-HX-X-Wurin yana buƙatar samar da wutar lantarki ga famfunan injin da kuma sanar da HL Cryogenic Equipment bayanan wutar lantarki na gida (Voltage da Hertz).-00-X
3.2.2 Nau'in Haɗin Bayonet na Vacuum tare da Flanges da Bolts
odel
Haɗi
Nau'i
Diamita na Bututun Ciki
Matsi na Zane
Kayan Aiki
Bututun Ciki
Daidaitacce
Bayani
Nominal Diameter of Inner Pipe
00X
8 ~ 16 mashaya
DN10, 3/8"
8 ~ 16 mashaya
Bakin Karfe Jerin 300
Design Pressure
Matsi na Zane.
08 shine 8bar,
16 shine 16 bar.
Kayan Bututun Ciki.
A shine 304,
B shine 304L,
C shine 316,
D shine lita 316,
E wani kuma.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Injin makaran Phase REPATOR Series | DN10, 3/8" | Armeniya
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaransanciDiamita na Bututun Waje:X | DN15, 1/2" | |||||
| FaransanciAn ba da shawarar ≤ sandar 16. Ko kuma zaɓi Nau'in Haɗin da aka Haɗa da Walda (sandar ≤40).X | DN20, 3/4" | |||||
| FaransanciYanayin Wutar Lantarki:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Icelandic
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Faransanci08 shine 8bar,00X | da kuma 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaransanciSamoa00X | DN15, 1/2" | |||||
| FaransanciSindhi00X | DN20, 3/4" | |||||
| Faransanci'Yan Tajikistan00X | DN25, 1" | |||||
| Faransanci'Yan Thailand00X | DN32, 1-1/4" | |||||
| FaransanciUzbekistan00X | DN40, 1-1/2" | |||||
| FaransanciXhosa00X | DN50, 2" | |||||
| FaransanciZulu00X | DN65, 2-1/2" | |||||
| FaransanciOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Yanayin Wutar Lantarki:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Bakin Karfe Jerin 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaransanciDN15, 1/2"00X | DN15, 1/2" | |||||
| FaransanciDN20, 3/4"00X | DN20, 3/4" | |||||
| FaransanciDN25, 1"00X | DN25, 1" | |||||
| FaransanciW03200X | DN32, 1-1/4" | |||||
| FaransanciW04000X | DN40, 1-1/2" | |||||
| FaransanciW05000X | DN50, 2" | |||||
| FaransanciW06500X | DN65, 2-1/2" | |||||
| FaransanciW08000X | DN80, 3" | |||||
| HTiyo na Jakar Injin Wanka00X | DN100, 4" | |||||
| HBawul ɗin Gudanar da Guduwar Iskar Oxygen na Ruwa na China00X | DN125, 5" | |||||
| HFarashin Jigilar kaya China China ISO Standard Tank 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSTsarin Famfon Injin Mai Sauƙi00X | Injin makaran Phase REPATOR Series | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaransanciWhatsapp00X | DN15, 1/2" | |||||
| FaransanciWeChat00X | DN20, 3/4" | |||||
| FaransanciJamusanci00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Girkanci
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Ɗan Denmark
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaosX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armeniya
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHIstoniyaX | DN15, 1/2" | |||||
| HLH'yan FrisianX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Icelandic
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoa00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHD'Yan Tajikistan00X | DN25, 1" | |||||
| HLHD'Yan Thailand00X | DN32, 1-1/4" | |||||
| HLHDUzbekistan00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
