English
Tuntube mu

Jerin Masu Raba Bango Biyu na Mataki

Jerin Masu Raba Bango Biyu Hoton da Aka Fito
  • Jerin Masu Raba Bango Biyu na Mataki
  • Jerin Masu Raba Bango Biyu na Mataki
  • Jerin Masu Raba Bango Biyu na Mataki
  • Jerin Masu Raba Bango Biyu na Mataki
  • Jerin Masu Raba Bango Biyu na Mataki
  • Jerin Masu Raba Bango Biyu na Mataki
  • Jerin Masu Raba Bango Biyu na Mataki

Takaitaccen Bayani:

Mai Rarraba Tsarin Vacuum Insulated Phase, wato Vapor Vent, shine musamman don raba iskar gas daga ruwan cryogenic, wanda zai iya tabbatar da yawan samar da ruwa da saurinsa, zafin da ke shigowa na kayan aiki na ƙarshe da kuma daidaita matsin lamba da kwanciyar hankali.

  • Rabawa Mai Inganci a Mataki: Jerin Rabawa Mai Bango Biyu yana amfani da fasahar zamani don raba matakai daban-daban na cakuda yadda ya kamata. Wannan yana ba da damar inganta tsarin aiki, ƙara yawan aiki, da kuma inganta ingancin samfur.
  • Daidaito Mai Kyau: Jerin raba mu yana tabbatar da raba matakan ruwa da iskar gas daidai, rage asara da kuma inganta tsarkin kowane bangare. Samu daidaito da daidaito a ayyukanku ta hanyar amfani da mafita ta musamman ta raba mu.
  • Gine-gine Mai Ƙarfi: An gina shi ta amfani da kayan aiki masu inganci, Tsarin Raba Bango Mai Dual Phase yana ba da ƙarfi da tsawon rai. Tsarinsa mai bango biyu yana ba da ƙarfi mai kyau da juriya ga tsatsa, yana rage buƙatun kulawa da tsawaita tsawon rayuwar samfurin.
  • Zaɓuɓɓukan Keɓancewa: Mun fahimci cewa kowace masana'antu tana da buƙatu na musamman. Saboda haka, jerin masu raba mu suna ba da zaɓuɓɓukan keɓancewa don biyan takamaiman buƙatun tsari. Wannan yana tabbatar da ingantaccen aiki da mafita mai dacewa ga aikace-aikacenku.

Whatsapp Sauke shi azaman PDF

Cikakken Bayani game da Samfurin

Alamun Samfura

  1. Rabawa Mai Inganci a Mataki: Jerin Rabawa Mai Bango Biyu yana amfani da fasahar rabuwa mai zurfi don raba matakan iskar gas da ruwa yadda ya kamata. Ta hanyar cire ƙazanta da ba a so da kuma cimma yawan abubuwan da ake so, wannan rabawa yana inganta ingantaccen tsari gaba ɗaya kuma yana inganta fitowar samarwa.
  2. Daidaito Mai Kyau: An tsara shi da la'akari da daidaito, jerin masu raba mu yana tabbatar da rabuwar matakai daidai, wanda ke haifar da ƙarancin asarar samfura da kuma tsarkin da ya dace. Ko dai raba iskar gas mai canzawa ko ruwa mai laushi, mai raba mu yana ba da daidaito mara misaltuwa, yana kiyaye daidaiton tsari da kuma samar da ingantaccen ingancin samfur.
  3. Gine-gine Mai Ƙarfi: An gina Jerin Raba Bango Biyu don jure wa yanayi mai wahala na masana'antu. Tare da ƙirar bango biyu, mai raba yana ba da ƙarfi da juriya ga tsatsa, yana tabbatar da aminci da rage buƙatar kulawa ko maye gurbin akai-akai. Kuna iya amincewa da mai raba mu don yin aiki akai-akai a cikin yanayi mai ƙalubale.
  4. Zaɓuɓɓukan Keɓancewa: Mun fahimci buƙatu daban-daban na masana'antu daban-daban. Saboda haka, Jerin Masu Rarraba Bango Biyu yana samuwa tare da zaɓuɓɓukan keɓancewa. Yi wa mai rabawa ɗin kwaskwarima don biyan buƙatun aikinka na musamman, tabbatar da ingantaccen aiki da haɗin kai cikin ayyukanka ba tare da wata matsala ba.

Aikace-aikacen Samfuri

Jerin samfuran da ke raba sassan jiki, bututun injin, bututun injin injin da kuma bawul ɗin injin ...

Mai Rarraba Mataki na Injin Injin

Kamfanin Kayan Aiki na HL Cryogenic yana da nau'ikan Rarraba Tsarin Injin Vacuum guda huɗu, sunayensu sune,

  • Mai Raba Mataki na VI -- (jerin HLSR1000)
  • VI Degassar -- (HLSP1000 jerin)
  • VI Tashar Iskar Gas ta atomatik -- (jerin HLSV1000)
  • Mai Raba Mataki na VI don Tsarin MBE -- (jerin HLSC1000)

 

Ko da wane irin Mai Raba Tsarin Rufe Injin Vacuum, yana ɗaya daga cikin kayan aikin da aka fi amfani da su a Tsarin Bututun Vacuum Insulated Cryogenic. Mai raba tsarin shine musamman don raba iskar gas daga ruwa mai suna nitrogen, wanda zai iya tabbatar da

1. Yawan ruwa da saurin samar da shi: Kawar da rashin isasshen kwararar ruwa da saurin da shingen iskar gas ke haifarwa.

2. Zafin da ke shigowa na kayan aiki na ƙarshe: kawar da rashin daidaiton zafin jiki na ruwa mai narkewa saboda haɗakar slag a cikin iskar gas, wanda ke haifar da yanayin samar da kayan aiki na ƙarshe.

3. Daidaita matsi (ragewa) da kwanciyar hankali: kawar da canjin matsin lamba da ke faruwa sakamakon ci gaba da samuwar iskar gas.

A takaice dai, aikin Raba Tsarin Mataki na VI shine biyan buƙatun kayan aikin tashar don nitrogen mai ruwa, gami da ƙimar kwarara, matsin lamba, da zafin jiki da sauransu.

 

Mai Raba Mataki tsari ne da tsarin injiniya wanda baya buƙatar tushen iska da wutar lantarki. Yawanci zaɓi samar da ƙarfe 304 na bakin ƙarfe, kuma zaka iya zaɓar wasu ƙarfe 300 na bakin ƙarfe bisa ga buƙatun. Ana amfani da Mai Raba Mataki galibi don hidimar nitrogen na ruwa kuma ana ba da shawarar a sanya shi a mafi girman matsayi na tsarin bututun don tabbatar da matsakaicin tasiri, tunda gas yana da ƙarancin nauyi fiye da ruwa.

 

Game da Mai Rarraba Mataki / Vapor Vent ƙarin tambayoyi na musamman da cikakkun bayanai, tuntuɓi Kayan Aikin HL Cryogenic kai tsaye, za mu yi muku hidima da zuciya ɗaya!

Bayanin Sigogi

微信图片_20210909153229

Suna Degasser
Samfuri HLSP1000
Dokar Matsi No
Tushen Wutar Lantarki No
Sarrafa Wutar Lantarki No
Aiki ta atomatik Ee
Matsi na Zane ≤25bar (2.5MPa)
Zafin Zane -196℃~ 90℃
Nau'in Rufi Rufin Injin
Ƙarar da ta Inganci 8~40L
Kayan Aiki Bakin Karfe Jerin 300
Matsakaici Nitrogen mai ruwa
Asarar Zafi Lokacin Cika LN2 265 W/h (lokacin da lita 40)
Asarar Zafi Lokacin da Ya Dace 20 W/h (lokacin da lita 40)
Tsaftace Ɗakin Jaket ɗin ≤2×10-2Pa (-196℃)
Yawan zubewar injin injin ≤1×10-10Pa.m3/s
Bayani
  1. Ana buƙatar a sanya VI Degasser a saman bututun VI mafi girma. Yana da bututun shigarwa 1 (ruwa), bututun fitarwa 1 (ruwa) da bututun iska 1 (gas). Yana aiki akan ƙa'idar buoyancy, don haka babu buƙatar wutar lantarki, kuma ba shi da aikin daidaita matsin lamba da kwarara.
  2. Yana da babban ƙarfin aiki kuma yana iya aiki a matsayin tankin ajiya, kuma ya fi dacewa da kayan aikin da ke buƙatar babban adadin ruwa nan take.
  3. Idan aka kwatanta da ƙaramin girma, mai raba lokaci na HL yana da ingantaccen tasiri mai rufewa da kuma ingantaccen tasirin shaye-shaye.
  4. Babu wutar lantarki, babu ikon sarrafa hannu.
  5. Ana iya keɓance shi bisa ga buƙatun musamman na masu amfani.

 

 

微信图片_20210909153807

Suna Mai Raba Mataki
Samfuri HLSR1000
Dokar Matsi Ee
Tushen Wutar Lantarki Ee
Sarrafa Wutar Lantarki Ee
Aiki ta atomatik Ee
Matsi na Zane ≤25bar (2.5MPa)
Zafin Zane -196℃~ 90℃
Nau'in Rufi Rufin Injin
Ƙarar da ta Inganci 8L~40L
Kayan Aiki Bakin Karfe Jerin 300
Matsakaici Nitrogen mai ruwa
Asarar Zafi Lokacin Cika LN2 265 W/h (lokacin da lita 40)
Asarar Zafi Lokacin da Ya Dace 20 W/h (lokacin da lita 40)
Tsaftace Ɗakin Jaket ɗin ≤2×10-2Pa (-196℃)
Yawan zubewar injin injin ≤1×10-10Pa.m3/s
Bayani
  1. Mai Raba Mataki na VI Mai Rabawa mai aikin daidaita matsin lamba da kuma sarrafa yawan kwararar ruwa. Idan kayan aikin tashar suna da buƙatu mafi girma don nitrogen mai ruwa ta hanyar bututun VI, kamar matsin lamba, zafin jiki, da sauransu, ya kamata a yi la'akari da shi.
  2. Ana ba da shawarar a sanya mai raba lokaci a cikin babban layin Tsarin Bututun VJ, wanda ke da ƙarfin shaye-shaye mafi kyau fiye da layukan reshe.
  3. Yana da babban ƙarfin aiki kuma yana iya aiki a matsayin tankin ajiya, kuma ya fi dacewa da kayan aikin da ke buƙatar babban adadin ruwa nan take.
  4. Idan aka kwatanta da ƙaramin girma, mai raba lokaci na HL yana da ingantaccen tasiri mai rufewa da kuma ingantaccen tasirin shaye-shaye.
  5. Ta atomatik, ba tare da samar da wutar lantarki da sarrafa hannu ba.
  6. Ana iya keɓance shi bisa ga buƙatun musamman na masu amfani.

 

 

 微信图片_20210909161031

Suna Fitar Iskar Gas ta atomatik
Samfuri HLSV1000
Dokar Matsi No
Tushen Wutar Lantarki No
Sarrafa Wutar Lantarki No
Aiki ta atomatik Ee
Matsi na Zane ≤25bar (2.5MPa)
Zafin Zane -196℃~ 90℃
Nau'in Rufi Rufin Injin
Ƙarar da ta Inganci 4 ~ 20L
Kayan Aiki Bakin Karfe Jerin 300
Matsakaici Nitrogen mai ruwa
Asarar Zafi Lokacin Cika LN2 190W/h (lokacin da lita 20)
Asarar Zafi Lokacin da Ya Dace 14 W/h (lokacin da lita 20)
Tsaftace Ɗakin Jaket ɗin ≤2×10-2Pa (-196℃)
Yawan zubewar injin injin ≤1×10-10Pa.m3/s
Bayani
  1. An sanya bututun iskar gas na atomatik na VI a ƙarshen layin bututun VI. Don haka akwai bututun shigarwa guda 1 (ruwa) da bututun iska guda 1 (Gas). Kamar Degasser, yana aiki akan ƙa'idar buoyancy, don haka babu buƙatar wutar lantarki, kuma ba shi da aikin daidaita matsin lamba da kwarara.
  2. Yana da babban ƙarfin aiki kuma yana iya aiki a matsayin tankin ajiya, kuma ya fi dacewa da kayan aikin da ke buƙatar babban adadin ruwa nan take.
  3. Idan aka kwatanta da ƙaramin girma, HL's Automatic Gas Vent yana da ingantaccen tasiri mai rufewa da kuma ingantaccen tasirin shaye-shaye.
  4. Ta atomatik, ba tare da samar da wutar lantarki da sarrafa hannu ba.
  5. Ana iya keɓance shi bisa ga buƙatun musamman na masu amfani.

 

 

 labarai na bg (1)

Suna Mai Raba Mataki na Musamman don Kayan Aikin MBE
Samfuri HLSC1000
Dokar Matsi Ee
Tushen Wutar Lantarki Ee
Sarrafa Wutar Lantarki Ee
Aiki ta atomatik Ee
Matsi na Zane Ƙayyade bisa ga Kayan aikin MBE
Zafin Zane -196℃~ 90℃
Nau'in Rufi Rufin Injin
Ƙarar da ta Inganci ≤50L
Kayan Aiki Bakin Karfe Jerin 300
Matsakaici Nitrogen mai ruwa
Asarar Zafi Lokacin Cika LN2 300 W/h (lokacin da lita 50)
Asarar Zafi Lokacin da Ya Dace 22 W/h (lokacin da lita 50)
Tsaftace Ɗakin Jaket ɗin ≤2×10-2Pa (-196℃)
Yawan zubewar injin injin ≤1×10-10Pa.m3/s
Bayani Rabawa ta Musamman ga kayan aikin MBE tare da Shigar Ruwa Mai Sauri da Fitowa Mai Sauƙi tare da aikin sarrafawa ta atomatik yana biyan buƙatun fitar da iskar gas, sake amfani da ruwa mai ɗauke da nitrogen da zafin ruwa mai ɗauke da nitrogen.
  • Na baya:
  • Na gaba:

    • Nau'ikan samfura